Recent content by lordhelemt

Less than a week later and the pump failed. Garbage.

Replaced the pump with a new Cardon unit and all seems fine.

Jenson car813. Bought the trim piece, wiring kit, and cheap backup camera. Did not get the steering control kit. easy install, sounds great

Crutchfield is your friend.

I need to replace the power steering pump (possibly lines too) on a '99 D2. A new Cardone unit is ~1/2 the price of the OE replacement. Any advantage to the OE unit?

Thank you!

Anyone happen to know the id for the console mounted D1/D2 cup holder? Looking to make an insert for skinny cans (daughters request) but I don't have one here to measure.

If you’re not going to reset preloads then you need to use whatever was on there before (ie gasket or rtv)

Just installed a new shuttle valve switch and preventatively did the bypass. Fault is gone and all is good.

Thanks for the info. Will order a new switch and do the wiring here then do the final connection when I see in a few weeks. Appreciate the advise.

My daughter just called with 3 amigos on her 99 D2. She ran the code and it came back 4114 shuttle valve electrically supervision. She tried to reset the code but the reset failed. I'm going to be seeing her in a few weeks so I'll hopefully take care of it then. Looking online it looks like...

I'm not sure what the "remote lead" is? Matched the Metra harness to the new radio leads and plugged the Metra harness into the factory harness. Does your new radio have preamp outputs? I think you need a radio withOUT amplified outputs to work with the factory amp.

When I changed the head unit I used the Metra 70-1786 (crutchfield) wiring pigtail and was auto retain the factory amp.

Left and right LR3 middle row seats. In decent condition but dusty from storage. Local pick up in Arlington, VA.

I decided to 3D print a new switch housing. If I get some time I’ll try and make a usb cover that’s resembles the rover door switch. Otherwise I’m pretty happy with how it looks