Recent content by Mike Hyman

P1199 - Manufacturer specific DTC - Fuel Level Sensor Circuit Fault I have replaced the fuel sending unit, and the fuel filter, the Rover still will not start, and has no fuel pressure on the injector rail. This is the one of the codes I got this morning, the other two are P0125, and P0138. If...

End of the day, put in new fuel filter, checked the schrader valve before and had a few drops very little pressure, put the filter in never heard the pump run and had pressure at the schrader but still would not start, came close twice, hard wired the fuel inertia switch, and still wont start.

But Im still not getting any power to the sending unit, am I missing with the reset on the fuel inertia switch

I have a 1996 Disco 4.0 engine, a few weeks back I had driven into town and was at the hardware store and it would not start. My float has not worked for years so figured I was out of gas. Got a ride got a couple of gallons of gas poured them in and it started. Went and filled it up and never...

1996 Land Rover Discovery (2015-04-07 20:52:31)