Recent content by Mrmerlin

Price drop 25.00 plus shipping

from info provided i would also swap in a new expansion valve and replace any of the pressure switches that are leaking. Also since the system was working fine till it wasn't, there is a good chance the original compressor grenaded, if this happened, then the lines have been contaminated...

my trailer connector fitting only has the 7 blade, not the 7 blade/4 pin type that you have . \But when I get things hooked up I will update this post. Right now with my 05 FFRR HSE I get check trailer lights, no trailer connected light, the green symbol on the dash. A fast blinking TS, and...

Looks like they are now making what most with LED trailers will need, a 7 blade to 7 blade RV plug adapter, this should let the Range Rover trailer wire system operate like its connected to regular bulb type trailers, we will see how things work out I just ordered it. A very inexpensive part...

Looks like they are now making what most with LED trailers will need, a 7 blade to 7 blade RV plug adapter, this should let the Range Rover trailer wire system operate like its connected to regular bulb type trailers, we will see how things work out I just ordered it. A very inexpensive part...

so, there I was,.....take the tape and insert it into the deck , see if it will play, cycle through a FF and then REW, then eject it, maybe the limit switch just didnt close, and it needs another cycle to function properly

Thanks for pointing that out, What I meant this is a factory sized cover to fit stock tires on 18 inch rims . Thanks for the nice proof reading , Fixed it above

I have a brand new Factory tire cover fits stock tires on 18 inch rims, it has the Rhino on it and the LR green oval logo, From Denver East for Discovery 2 45.00 plus shipping PM Maveric2c@yahoo.com

remove the IAC valve and see if its sticking , if it has notches in its movement then replace it

you can try some acetone on a rag. wipe one spot then move to another as the acetone may eat into the plastic. so its one wipe, then move to another area, wait a minute, then wipe the same spot again, this should remove the paint but leave the plastic undamaged

have you swapped in a new Rover MAF? do you have any vacuum leaks?

next time your driving the truck and it wont go with lots of gas, stop and take a peek at the cats if they are glowing red (do this at night,) then they may be clogged, or you have ignition issues

hey search works

what does the white smoke smell like? If its sweet then you have a coolant leak. You can tell pretty quick by removing the spark plugs and looking at them, if any look really clean or even have a rusty electrode then you have a coolant leak into that cylinder

try using STP oil treatment it works great for priming the oil system and the pump will draw the oil