G'day gents,
The only way I can get the air flow from the floor vents to stop is by selecting the windscreen setting. If I have the face setting only it still blows a lot of air from the floor vents. The problem is that is significantly reduces the air flow from the face vents on hot days. I've...
I have had my d2 since new. I had it without CDL for many years until retrofitting. CDL is definitely better with traction control. However traction control when driven correctly works and works better than in the video. It requires considerably more throttle than what was uses in the first...
03disco2 how did the centre diff "give out". They are not a viscous set up. Do you mean you had a shift problem to engage CDL or didn't lock it for whatever reason and relied purely on traction control? Cheers
Gday all. Got with the tech thing and am sticking an Acer Iconia with off road mapping into my 02 Disco 2. Its a 1.5 foot long flex arm that is meant to be bolted in with the seat bolt (to help prevent a projectile in an accident). In my D1 that would be easy - not in the D2 with its seat...
High all - I have 100,000 odd miles on my Disco 2, 02 4.0 in Australia. I have had it since new and its never had an overheat. I have no problems with the motor but just wondering on its life as long as I keep up the oil changes (always used good Penrite and often) and dont overheat her. I...
I did mine just as it was starting to chirp at 150,000 KILOMETRES not miles and it was visually going out too...I used Hardy Spicer HD greasable unis and kept the original centre bearing that was without play and looked fine...time will tell I guess.
Cheers
HI all - bringing this one back to life, has anyone got the Vin range for these problems. A mate with a 4.0 03 just had his pump go bang...nice!
Cheers
I use the Scanguage II for my 02 V8. I like the actual water temp reading (combined with an after market low water alarm it gives much better protection - both for overheat and underheat when towing a large boat or swapping to LPG which causes sludge in the converter if not hot enough).
I also...
Thanks fellas - the front of the D2 does not have swivel housings but rather runs CVs...thats what I replaced. I have also replaced the uni joints in the double cardin front drive shaft...I will check the hubs.
Cheers
Hi all 02 D2 manual V8. Clicking in the front end on take off from stationary - louder and more of them with the 2 tonn boat on the back. Only for the first few feet. I have had the CV's and half shaft replaced a couple of months ago and double cardon stripped out and HD greasables put in.
I...
Sorry mate - Im an Australian. I was having some fun with you. A "tug" here in the vernacular means to masterbate - so dont let anyone tug you!
Snatch here - as I think over there - means beaver or female genitalia - hence make sure you get a snatch.
Cheers;)
PLEASE dont let anyone tug you...please ask for a tow or to be snatched out. Snatches are nice, but if you cant get a snatch ask for a tow...NOT a tug.
Cheers
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.