Search results

Selling a D1 safety devices roof rack. This is the tall version, so both sunroofs will open and roof rails don't need to be removed. It does have a few scratches, and one dent on one of the tubes. This will fit a D2, but will look shorter length wise. Also includes all mounting hardware...

What's the best and cheapest way to ship a roof rack? I've called Conway freight and was quoted about $325 as their minimum. What have people shipped for in the past, and what should I expect? Thanks

What would cause my front rotors to be grooved? Its not just one, but several around both the front rotors. The pads look good, so worn pads aren't the culprit. Would you advise changing the rotors? Thanks

So I know I have a leak somewhere, which I think it is either the box or the pump, but know its not the hoses as those were replaced. The pump makes a nice groaning noise when it's got some resistance in the steering, plus the steering is heavy when there is something putting some resistance on...

I've got the passenger wet carpet problem, and noticed a rust hole on the side kick panel. I haven't done the test yet to find what could be the source of the leak, but anyone know what flows down the A Pillar? Sunroof drain plugs? It's in a difficult spot, where the floor board meets the...

Garvin Wilderness Roof Rack, measures 60"x60"x4", with two 100 Watt Eagle Eye lights and one 55 Watt rear light. Comes with the two Light Brackets and Spare Tire carrier. The tire carrier is slightly bent, but is still functional. I have feet to fit Discovery I/II or Range Rover Classic...

I am having this squeaking coming from the left front wheel of my D1. It only begins when I turn slightly left or right, and while driving. I had CitySide check the bearings while my truck was getting other work done, and they said they looked fine. The noise does go away if I apply break...

http://boston.craigslist.org/gbs/car/780422596.html May be priced a bit high, or no?

So I just pulled the window ECU this evening, as the rear windows wouldn't work. Found the common problem, soldered it up, and plugged the board in before assembling everything together. I got the windows to operate for a second before they just stopped again. Turned the ignition off for a...

Has anyone replaced the bottom portion of their D1 seats? The other day I felt myself just sink down, and the bottom webbing has come apart. Is there a replacement part for this, or some other fix I can do?

Looking for 2 or 3 110 steel wheels, 16x6.5, preferably used Thanks

Did a search, and didn't come up with a solution for a D1. Replaced the brake lines, and bled the system. Upon pushing the brake pedal the first time, its not as firm as it used to always be, but if I pump it a few more times it becomes more firm. Would this indicate there is still air in the...

Hey All, I'm wondering if anyone knows what size line is used as the original brake line. Also, is there a specific thread that the original uses? I'm replacing the lines from the fitting at the Drivers door all the way back, so I'm coupling to the original piece that runs from the ABS unit...

Anyone have a ladder for a Disco they're looking to get rid of? Don't need mounting hardware if you don't have it

Is it possible to fit RRC front seats into a D1? Is it the same fittings and so forth? Thanks

RRC used dog guard for sale. This is very sturdy. In very good condition with all mounting hardware $100 + shipping

Looking for a ladder to fit on a D1

I'm not sure if the bulb is gone on the dash, or if the CDL is notat engaging correctly. Shoud the CDL light come on with the ignition to test to see if the light bulb is not burnt out? If I engage the CDL, which seems like its working i'm almost sure, the light isn't coming on but I know it...

Need advice on trying to remove shocks, but I will be re-using them. When trying to remove the front, specifically the bottom nut, the shock will turn when trying to loosen. I need to prevent this from turning, but don't want to damage the shock with clamping it with vice grips. Anyone have...

Hi All, I've got a '95 Disco, and I believe it's a roto haven't checked on that yet. If it is, is it possible to swap out the drive shaft from a '90 RRC? Is it the same size, weight, etc...? Thanks!