:banghead: Although I have recently replaced every part associated with the cooling system on my '97 D1, including having the radiator rodded, I am still having overheating issues. To monitor my coolant temps (and other things), I recently bought a wifi OBD-2 connector and downloaded the...
I have a '97 D1 with ~175K miles that I bought brand new. Since it has now become my toy, I decided to overhaul the entire cooling system. As part of the process, I removed the radiator and found/researched a shop that could do any work needed on it. I had already decided, based upon this board...
97 D1 with 170K miles, owned it since it was brand new . . .
:banghead: I recently replaced the heater core and, of course, had to disconnect the A/C lines at the firewall. Everything is reassembled, but now I cannot get the system to accept R134A. It simply will not charge . . . and yes I am...
My starter died, and I just replaced it with a NAPA rebuilt part. It solved the problem. However, there is a slight "shriek" when I turn the key. I remember from many moons ago when I replaced a Chevy starter that this noise meant that I needed to adjust the shims that were required for...
I remember hearing about a tool that can be used to replace the bushings in my 97 D1. However, I can find no evidence of it now. If I remember correctly, it was called the "Bushwacka" or "Bushwacker". Am I crazy?
I am considering having my exhaust manifolds coated by Jet-Hot. I have looked at the posts on this board, but have questions. I tried to call Jet-Hot but got disconnected. Hopefully someone has tried this procedure and can tell me some things:
1) When you ship them your part(s), where do...
I recently purchased a new set of Michelin LTX M/S for my '97 D1, including a new spare. The only problem was that they only could get tires with the raised white outline lettering. My personal preference is black letter, so I had them turn the tires so the black faced out. Trouble is, the...
I have just replaced the front radius arm/axle rubber bushings on my '97 D1 with red poly bushings. However, I am having trouble lining up/centering the axle bracket bolt holes with the new bushings. In other words, I cannot get the new bolts back through the holes for reassembly. I have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.