Search results

This type is called skin pin or the above These are C303 laplander volvo portal The steering is normal .

the portal axles is in progress the pictures that you saw was for my friends . As for the Bosch manifold it was a fun project at idle it is alot smoother i feel it is faster in the 60/70mph i still want to install an aftermarket fuel pressure regulator fuel echonomies no noticible difference...

they should share the same spline and diameter if was teken from the same year but you will never know with LR ,on mine the 2003 was a direct fit to my 94 i wanted to take the SW but it is the same so why bother .

no, climate control of the d2 will not work with the old wiring it is mechanical and the d2 is fully electronic . Dont bother to add this feature. remember before you throw the old put both units side by side and take out the small bracket that attach the block of relays under the passenger side...

Here is mine everything is bolt on 2003 into 1994 sorry for the air bag is not connected on mine but i thinks it share the same connector ,on the driver side i reused the old one but not connected also (ps not recomended to disconnect arbag if you do so you do it at your own risk )...

i did that to the rear :cool:

you get 1 inch clearance plus now i did 2 inch lift ,it will acomodate the 33/12.5/15 esyer plus i might go portal .......

lol i fixed the major leak that was the power steering hoses and did a relocation on the bottle all the rest is.....you know it is a rover

this is my flexi flares 3 inch still waiting for 33/12.5/15 BFG MK2 <a href="http://s1111.photobucket.com/albums/h472/94Discovery/Flexi%20Flare/?action=view&current=DSC05744.jpg" target="_blank"><img src="http://i1111.photobucket.com/albums/h472/94Discovery/Flexi%20Flare/DSC05744.jpg" border="0"...

thanks guys

My Disco is marking his territory more than usual . can i cut the crimped clamps and change the rubber hose and install normal clamps .is this line under pressure or it is only recirculating oil from the auto transmition . Thanks <a...

soooo sexy :drool::drool::drool::drool:

how about a complete fender flare. http://i1111.photobucket.com/albums/h472/94Discovery/Flexi%20Flare/DSC05744.jpg

one land rover is enough to bankrupt you so the answer is no thx .

need a 14 cux (hotwire)for a 94discovery i am doing a Meagsquirt transplant in it . need the box only and the connector no need for a working ecu . Thx will pay the shipping :)

Check your TPS

you need to have a 1x 16in dual speed ,i use a Ford taurus fan it will cost you 50$ from the scrap yard. it is rated at low speed 2500 cfm and on high speed 4500sfm and need to trim its original shroud and make a new one to fit the rover . note you need to make the system work on dual speed...

and still i do not have a horn . the horn is ok i checked the wiring and the relay and every thing is ok ,when i press on the steering i here no click on the relay , where do i check next :banghead::banghead: but on a positive side i fixed my wiper motor now the wiper park...

thank you for the picture .:D

what type of winch you installed can you post some pics of the bottom . clean instal :victory: