Search results

WTB used Disco II ARB Sahara Bar Let me know the price and the cost of shipping to CA, 92603. If within the Southern CA area I can pick up as well. Thank you!

I tried Option B for the mod found here http://www.landroverclubvi.com/abs-mod.html in hopes of getting rid of my three amigos with no success. I double checked the connections and did the multi-meter test as described to make sure I had a good SVS replacement but the codes haven' cleared...

Irvine, CA Black Interior Land Rover Discovery II SE/ 134k with the following components replaced: Water Pump (130k) Radiator (130k) Thermostat (130k) Timing Chain and Gears (80K) Oil Pump (80k) Head Gaskets (80k) Secondary Air Injection Solenoid and Control Valves (133k) Fuel Pump (115k)...

Hey guys, I've been struggling with the following two codes: P0412 Secondary Air Injection System Switching Valve A Circuit Malfunction P0415 Secondary Air Injection System Switching Valve B Circuit Malfunction The SAI solenoid has been changed for a new one and the both vacuum harness and...

Hey guys, I need the plastic tubes that connect the plastic SAI reservoir to the SAI valves, intake manifold, and solenoid. Thanks! williamknodt@gmail.com

Im looking for a spare tire relocator to accommodate a32" tire. Thank you. Williamknodt@gmail.com

I need a vaccum hose that connects the pump to the sai pipes. I can be reached at williamknodt@gmail.com Thank You!

I'm in need of a DII engine wiring harness. Thank you williamknodt@gmail.com

I'm in need of a DII engine wiring harness. Thank you williamknodt@gmail.com

I'm in need of a DII engine wiring harness. Thank you williamknodt@gmail.com

I've been struggling with a P1117 code (temp sensor low voltage) for the last month and after replacing the sensor on the intake manifold, and the thermostat, I'm still getting the code. The lower rad hose is cool after the engine is up to temp after having driven it for a while and so the I'm...

I've been struggling with a P1117 code (temp sensor low voltage) for the last month and after replacing the sensor on the intake manifold, and the thermostat, I'm still getting the code. The lower rad hose is cool after the engine is up to temp after having driven it for a while and so the I'm...

I've been struggling with a P1117 code (temp sensor low voltage) for the last month and after replacing the sensor on the intake manifold, and the thermostat, I'm still getting the code. The lower rad hose is cool after the engine is up to temp after having driven it for a while and so the I'm...

I've been struggling with a P1117 code (temp sensor low voltage) for the last month and after replacing the sensor on the intake manifold, and the thermostat, I'm still getting the code. The lower rad hose is cool after the engine is up to temp after having driven it for a while and so the I'm...

Good Condition and includes shipping. Lower 48 States Only. Will not break up. Contact me at bknodt@yahoo.com

My engine is not starting up after a rebuild with the M&S lights flashing, temp alarm light on and hill descent with ! next to it. The engine is turning over but not catching. During the build I found out via a plume of smoke that I ground a wire or two by pinching the wiring harness with the...

I will be replacing both the main and con rod bearings with standard size ones this weekend and need to know what the tolerances are for both when I plastiguage them. Thanks!

All of the following were purchased for a project I've decided not to do. Thanks for looking!!! Front Cover (Semi-New, 500 Miles on it) - $250 Water Pump w/ Gasket (New) - $65 Left Hand Cylinder Head - $150 Right Hand Cylinder Head - $150 Oil Cooler - $25 Left Oil Cooler Line (New) -...

Hello, I'm looking for two cylinder heads with or without valves so long as the cost is around $100 ea. Having been planed not neccesary, just a couple of ugly used heads will do. SoCal Pickup Preferred. Thanks.

I'm doing some comparison shopping for my 100k engine rebuild project and I've come across RTC and STC part numbers for the same product. What is the difference? Factory vs. after market? Many thanks!!