Thank you all for the advise and helping me diagnose this. I will do some more testing and digging around to follow your suggestion of finding the break in the wire. I’ll report back with any findings.
Y’alls help is truly greatly appreciated!
Absolutely no need to apologize. So I checked and I have no power to pin 4 of the listed connector. I connected power from the fused 12v auxiliary plug in the side to the white wire on the blower and now the blower is working and everything works as it should. Would the easiest solution then be...
Ohh ok, so would that tell me that it?s something between the rear interface and the blower motor? So when I turn the blower speed knob from the off position to any position I hear a clicking noise near the rear blower motor. But when checking the voltage on the blower motor pins there?s nothing
Across Pin 85 and 86 I get a voltage of 14.63, across pin 30 and ground i get 14.7v. On the blower control module between the black and red wire I get 2.144v and then between the green and ground I get 2.144V as wel. This is all with the car running and the controls on and on full setting. And...
Alright, I put it all back together as I needed the car, but I’ll pull it all apart again and test all the voltages and report back to you and see what you think. Can you specify what you mean by the rear climate control interface connector?
I?m in need of some help. I?ve searched the forum and I?ve tried all the suggested diagnostic tactics. The rear climate system in my 2011 LR4 Isn?t working. The front works fine. I?ve replaced the rear blower control module and that didn?t solve the problem. I?ve checked and replaced all the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.