Search results

Hi All An update on my findings this weekend! I noticed that my park sensors isn't always working. After checking wires again from the CJB to the ABS module, suspension ecu, transmission ecu, I found no faults. However, when I unplugged the park sensor module, the car cleared all errors...

Thanks Jymmiejamz I will check for leaks and if all is good, get a service kit for the compressor. I also read that it could be the block valve? I will check this as well. Something I noticed is that the wheel height sensors on the 4x4 info screen flashes red. It is on all the wheels, and when...

Thanks for everyone's advice!! I found a broken wire. The same as what WHYdiscoIIErik had. All errors are gone now!! But another issue came up. I have no errors on the car, it is in access height mode, the compressor runs but not raising the car at all. I felt and the compressor get extremely...

So I spend another few hours this weekend on the car. First, when I started the car Saturday morning, it lifted and there was no errors, suspension 100%. I drove to the dealers, they did a diagnostic and it only gave a Network related error. cant remember the code thou. But they did clear the...

Thanks jymmiejamz I did buy a new one, but like you experienced, it could be bad out of the box. I will test the one fitted now....

I agree, some guys would rather avoid getting stuck in it to try and resolve the issue. Like I said, I have spend many hours trying to find the fault, but to be honest I have mostly focused on the suspension related components rather that the ABS, especially wiring. I will take the car for a...

Thanks discostew I will check for broken wires along the sensors end modules for the ABS. I have a diagram of the ABS and wires leading to components. I will strip the car this weekend and check if I find wires broken off or a faulty ground somewhere. I have spend in total nearly 30hours this...

Hi all Really hope someone can give me a bit more advice on my current Disco problems! I have a 2006 Disco 3, TDV6 HSE I have read through many of these blogs and threads and found certain points that I check and replaced where needed, but my landy is still giving me the famous Suspension...