Hi,
Looking for low mileage 1997 Disco 1 fuel pump and mounting hardware (large nut, sealing ring). I beieve I have the advanced EVAP unit (fuel pump has two plug connectors). Let me know if you have one and the price.
Thanks in advance.
I replaced my seized rear wiper motor with a used one for my 1997 Disco. Had to splice into the harness but other then that it fit stock and works great. The only thing I am missing is the nut that secures the motor to the outside of the rear door. The old motor had a plastic hex nut and the...
Looking for a unused or lightly used Michelin XPC 235/70/16 spare tire for my disco. I have 2 asnd need 2 more to make a set.
pm or email me at narinder@nb.aibn.com if you got one
Thanks!
I have herad that the ECU can lose sync. I am having a hard time starting my 97 disco.. it wants to start but it doesn't quite make it. Usually if I let it sit for a while I can get it started. Once started it runs fine.
During my search I learned that if your CEL does not come on when the...
If the clicking sound is new and is coming from the valves I would suspect that you have more then a bad sending unit and low oil pressure. Coud be the pump ... also check your breather hoses to see if they are clogged. If so, it can indicate sludge build up in the motor.
Looking for a good set of stock fog lights and the front and rear winshield wiper linkage. The front wiper linkage can be with or with out motor but the spindles must turn freely.
Thanks!
narinder
narinder@nb.aibn.com
wd40, liquid wrench, rust check ...anything I could get my hands on. I will pick up a can of PB Blaster and give it a try .... I hate to buy a new assembly when the wiper motor works great.
I removed my 1997 Disco front wiper motor and linkage to find the passenger side spindle seized. I tried to work in penetrating oil and it has improved but still doesn't spin freely. Is it possible to take apart the spindle to clean off the rust etc.....
Your linkage may be seized up. I had the same type of problem and on disassenbly discovered that the passenger side spindle was seized up. I'm trying to free it now but it looks ike I'm into buying a new wiper assembly...motor and all.
I have a 97 Disco that refuses to start in the mornings or if I let it sit for an extended period of time. I will crank it and it will almost starts but no go. If I leave it for a few hours and try again... it starts right up. Once Iget it going I can leave it at work all day and it starts right...
I have noticed rust around the alpine windows as well as, in the rear door jambs on most disco's around here (eastern canada) , I don't think it is a deal breaker. In hindsight I would have popped the alpine windows 2 years ago when I first saw evidence of rust and took care of it then. Just...
Well, I'm into it now. The rust is much worse then it looked like from the outside. It's off to the body shop since I'm going to have some metal welded ....
The snap-on tool only cost $20 ... another tool I'll only use once and through into the tool box...but if it makes the job easier it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.