Search results

Can you have a bad cat with no CEL. I have a fairly loud knock that seems to be from the drivers side cat (I took a listen with a mechanic stethoscope). I have never had a CEL from exhaust issues. 146k, just had the back half of the exhaust replaced. Acceleration is a bit doggy, but I cant...

Ok, '98 D1 Front Drive shaft aft flange bolts? So I have identified that I had a u-joint issue, researched what joints I wanted to use, dropped the drive shafts, soaked the ujoint cups, replaced the ujoints, and I am now mounting the drive shafts back on the vehicle. I have determined that I...

I completed a rear brake job about a week ago and now I have a PING only in reverse. I followed instructions to the T and had minor complications (took to darn long). Replaced the rotors, pads, inner and outer wheen bearings and races and finally bled the brakes. I used the kit from AB with...

Sorry nubie question. I am finishing a rear brake job on the 98 D1. I have replaced wheel bearing assemblies on both rears. I am in the process of installing the stub axel assembly and I am having some resistance on the drivers side. Passenger side went in perfectly. Any suggestions?

I need some advise please. I started a rear brake job on my '98 D1 tonight. I was talking and working, which turned out to be a bad combo for a nubie. I loosened up the out bolts on the calipers, which apparently turns out to be the wrong ones. My question is now that I have loosened up...

I am parting with my Thule setup. I just posted it on craigslist this morning. I would rather it go to someone from Discoweb. Please let me know if there is any interest. Buyer pays shipping from 53182 http://milwaukee.craigslist.org/spo/2174169344.html Thanks!

I am in the process of working on my rear passenger side window. I have read through a lot of posts regarding the regulator and regulator washer rebuilds. The issue that I have is the Glass lifting channle rusted to dust. I ordered a new one from Will and I am expecting it to arrive...

I am planning a rear brake job for a '98 D1, 142000 miles. I have read all the threads and subscribed to a ton of them! I will be using Rave to assist in the project. A couple of planning questions. 1) Should I plan on replacing the bearings and race while I am in there or just plan on...

Just thought that I would post to get a couple of opinions. '98 D1 141k miles. Truck has sat for 2 years with a total of 1000 miles on it. I am hoping to keep the truck as long as I can so I am using it sparingly. I have replaced my engine oil every year in spring, except this spring...

Just thought that I would post to get a couple of opinions. '98 D1 141k miles. Truck has sat for 2 years with a total of 1000 miles on it. I am hoping to keep the truck as long as I can so I am using it sparingly. I have replaced my engine oil every year in spring, except this spring...

Just thought that I would post to get a couple of opinions. '98 D1 141k miles. Truck has sat for 2 years with a total of 1000 miles on it. I am hoping to keep the truck as long as I can so I am using it sparingly. I have replaced my engine oil every year in spring, except this spring...

Hey, It is spring in Wisconsin and time to take the truck out of the garage. The last time it was driven was 50 miles in December. After checking tire pressure an reinstalling the battery I went for a maiden voyage. 1) Gave her a little gas and suddenly thing got loud. 2) Decided I better...

I have read most if not all threads on exhaust work for Disco's. There are several unanswered question that I have. I don't think that they are repeats..... So 1) I have managed to pop a hole in the exhaust pipe just before the muffler and just after the connection point to the Y pipe from...

Thule Super High Foot gutter mounts with 78" Load bars. Had it installed on a '98 D1. Used several seasons and upgraded to full gutter mount rack. Mounts Load Bars Key $150 plus shipping. Will post pictures if ya need to seem them

The title says it all. I need a new fuel pump housing that is evap compliant. Do not need the pump, but if it comes with it I will consider purchasing it. This is an ASAP purchase as I have emission testing next month! Want to stay legit.

Ok. Given the title of this post you would think that I have solved my problem with all the searching I have done. I have used all the above in searches to describe what I am having trouble with. I can find no resolution to anyones issue. '98 D1 130k miles. No Idle problems No starting...

'98 Disco 1 136k I recently replaced my fuel pump with the help of Boulderbears description using a master e3270 pump. I went to Autozone and they matched the part number but it was a different manufacturer(I am assuming that is what master is). I have been getting a P1447 code ever since. I...

I did a search in advance of asking this and did not see any direct info. I purchased the '98 Disco used (7) years ago with 28k on it (currently has 132). High / Low was sticky and I was dumb enough never to check the diff. At any rate I no longer use the vehicle as a daily driver so I am...

I have removed the rear seat in my '98 Disco 1 and am in the process of rigging up a tie cargo tie down system. According to my Land Rover accessories installation guide there is a tie down system available for the Disco 1. Both AB and my local dealer told me that there is no such system and...

I have removed the rear seat in my '98 Disco 1 and am in the process of rigging up a tie cargo tie down system. According to my Land Rover accessories installation guide there is a tie down system available for the Disco 1. Both AB and my local dealer told me that there is no such system and...