Search results

center bearing is RGW100020 outer bushes RGX100960 (2 off)

My air suspension seems to be working ok however will not raise up to the extended setting. When I press the button, the compressor runs for a while and then stops - the dash indicator keeps flashing as if it is in the transition mode. I've had an occasional amber SLS warning light come on but...

this is the sort of thing we use in Australia http://4x4intelligence.com.au/recovery_points.htm it's more than 10mm thick and has been engineered for the job

If your lights didn't come with wiring suggestions - most do - have a look at the last item in the 'tech' section on this site. a couple of points, the aux lighting switch is a momentary on one not latched so needs the appropriate relays and you should power the lights directly off your...

Great post and good to know it is working well for you. What year is your car and how did you connect up the indicator light on the dash? Did you find the connector in the loom and if so where was it? I'm about to do my 02 model with an 03 case and OEM cable actuator. thanks

I'm guessing that is what the wire on pin 19 "I-BUS communications" is for. I've done a quick search and found references to I-BUS in relation to BMW car sound systems. The D2's were made when BMW owned LR, so makes sense that they would use that protocol. Heres a kit to interface a PC...

Great write up thanks, I'm considering doing this on my 2002 model. A question about having to have a CD in the stacker, does this mean you have to keep 'playing' the CD in order for the head unit to pick up the input? thanks

Here is the text from the manaul - there's a pic I can't copy and paste but it looks very straightforward... the cheater panel referred to is the triangular cover inside the assembly, looks like it pries off. Removal 1. Release cheater panel from front door. 2. Remove anti-rattle foam pad...

I had this problem early on with my 2002ES. Seemed to occur after lane changing or overtaking mildly. The dealer either recalibrated or changed out one of the acceleration sensors - I think in the roof - said they had had a bad batch that would give wild readings to the ACE system. Haven't...

Anyone had to replace a front wheel stud on their D2? LR do not supply the studs separately from the hub assembly. Is there an alternative out there?