I have a rear ladder that is solid but needs some TLC from a pain perspective and a Yakima Roof rack for sale, again its solid but needs some paint
The Ladder came off my 01 DII so I suspect it only fits that make however the roof rack I suspect will fit any roof
Ladder - $100
Roof rack - $200...
I have PDF'd it for ya if that works, Its 12mb (color pics) and Discoweb doesn't seem to like files that big, do you have an FTP site I can upload it to?
OK so I know there are a million posts on this, but there was one post in particular where someone called out all 4 issues in detail and how they can be fixed. They explained the different pricing options per different repair option and that LR sort of recognized this was a problem and released...
2001 DII SE7 (160K)
OLD Thread I know but with the stock suspension and stock rims have you guys with the GG AT2's had any problems? I am looking at picking up a set.
I like the deep snow rating and the ice rating wasn't bad considering we get 5ft of snow (atleast) up hear in the winter...
Hey guys hope your having a great weekend, my right headlight went out so I decided to change them both.
Upon changing the right light I check to see if all was working and poof of course not.
I looked at the light connection as it was different from the left one and it had a sort of a blue...
Thanks, so if I cut the key everything else will be fine, no need to have my remote piece reprogrammed or sync itself with the key?
The remote portion works, its just a new key I need.
Thanks
The initial main problem here was that I could not turn the key when it was in the ignition, after taking it to my mechanic of course he was able to get it to work (I think it had something to do with my disco being parked on a hill and wheels being lock a specific way, the sun and moon...
Good morning all, first off thanks in advance for any help you can provide here, I have 2 issues
1. when I turn the wipers off they dont reset to the down position
2. When I use the intermittent selection the wipers to not reset to the down position, they stop half way.
Thanks
Re: Hard shift into low, tried to pull back into High and shifter went "limp"
Just thought I would let you guys know, the cable had snapped, and surprisingly enough only an $80 part, and 1.5 hours of labor.
Thanks again for all your help
Re: Hard shift into low, tried to pull back into High and shifter went "limp"
Thanks eliaschristeas, if thats the case (I should know tomorrow) I will ping you ASAP.
Thanks everyone
Re: Hard shift into low, tried to pull back into High and shifter went "limp"
I dont believe so as I had the truck moving as directed (under 5 mph in neutral) on the instructions.
If that were the case (what you mentioned I broke) what would the cost of that repair be?
Any other ideas what...
2001 LR DII SE7
Hey there, I wanted to test out my High/Low it was a super b-snatch to get it into Low (really had to push it) and it would not fully go in so say the warning light that is dinging but the truck did move while in drive with no problem.
I figured I would put it back into high...
Hey Folks looks like the little "tit" on the end of my shifting selector shaft has broken, and I need the entire knob and shaft. does anyone have one.
I would be looking for black or even wood finish (I have wood trim on the Disco)
hoping someone has one, to avoid having to go to LR and...
OK that seems to be it, looks like the tip is broken, not sure if it was because it was broken or not, but I was able to pull the shift knob and shaft right out, which would of been an easier method :)
should I assume I need to buy a whole new shaft and I guess knob?
I appreciate all your help
I got into my disco after it being at the garage, and started her up, but I noticed that for some reason, now I dont have to press the shifter button down to move the stick from any gear.
when the truck is off the stick locks but when its on thats when it can move freely between P,R,D,3,2,1...
I could really use some help here, I simply need a horn button for my DII, the dealership requires me to buy the button and switch assembly for $123.17, which is absurd!
Can anyone help me here, currently I am driving without a button with a piece of paper between the assembly pieces to stop...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.