I had the same issue, somehow I lost power to the fuse block for the fan. They make a fuse with a aux wire connected to it. I plugged that into a live spot in the fuse block and ran it over to my fan fuse. One of these days I'll dig into it and do it right but it works for now. Suspect there is...
Guys, I found this link from Discoart who swapped out a ZF22 with a ZF24 trans in an 02 D2
"Just to update everybody, I did install the 4HP24 in my 02 Disco. Everything was plug and play and it is shifting great. I am using my original transmission ECU."
Alright boys here we go, the ZF24's...
That would be great to install the zf24, has anyone done this successfully. My worst fear is that I swap out zf22 trannys and the same thing happpens down the road. I'm able to use the truck now thanks to the advice from Ian and Will so the pressure is off. If anyone has done this let me know...
Yup, looks like different transmissions in the D1 and D2. I've been working with Will to get a used one but seems his email and phone are down. There's a couple on ebay that look pretty well priced so I might have to jump on one. My wifes already car shopping and looks like I'll need to work a...
OK, I found this buried but it looks like I'm SOL.
I have a 4sp ZF, when I select "D" the vehicle won't move, when I select "1" the vehicle moves off. I can then select "D" and continue to drive normally. If I stop I have to start in first again. Why?
A sprag clutch has "inverted" and will...
Guys, that's it! I got it going in 1st and it shifts on it's own from there. What is it and you guys rock by the way! I've been scrambling looking at used cars and more used transmissions.
I've got an 04 cdl shifter in it and it's the same with the center diff locked, 1 and reverse only. I'm thinking that 4,3,2 use a combination of a failed clutch pack but not sure.
I was driving home from work on slick rainy roads today. I left from a stop sign and had some wheel spin. When the wheels hooked up I heard a pop and lost Drive, 3rd, and 2nd gear, 1 and reverse still work fine. I have a 2000 D2 with 145k on it, I'm guessing I lost a clutch pack but wanted some...
I got my sticker from rovers north, do a search and they list it. Ever since I installed it on the console I've never had to worry about getting stuck. If I remember right there was also this little lever thingy and some cables and maybe a bracket or two that bolted to the t-case. I think the...
Sounds like you've got a bad ignition module. They're solid state and if they're bad they flake out when they heat up. I've had 3 motors do this same thing, try watching ebay for a replacement. I would have turned that thing into a floating duck blind. I want to build one for the Mississippi...
Well guys this must be my lucky year. This past Sunday I tagged out again. I was hunting some bottom land along the Mississippi that has been empty for the last several years. Right before sunrise I was listeneing for gobblers and 3 fired up. I slipped between the river and some timber to within...
Scored this past weekend. 20lbs, 9in beard, 3/4" spurs. Ive killed bigger but this was a great hunt. Heard him about 7AM gobbling his head off, no hens and love sick. Slipped in to 60 yds away, set up, fired off a few yelps with my mouth call and he came strutting through the brush. At 30 yds...
You have to wonder what LR was thinking with the white head liner and trim. After a day of hunting my two Choclate labs wait till they hop in the back of my Disco before they shake off all the crap they have sticking to their hair. I'll be working on a tarp to cover the whole back area cause I'm...
I would pull one of the fuses and replace it with a fuse tap. Fuse taps have a powered/fused lead wire attached. They max out at 10 amps but that should run your CB with no problem. Pep boys and Autozone sell them for $5 or so.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.