I pulled my clock out the other week to check why I got no light and try and figure out why I was missing parts of some of the numbers. Well, as I was putting it all back together, I broke the LCD display. I got another clock of off eBay and switched everything over this morning. Good news is I now have all of the parts of all of my numbers and a new bulb. Bad news is I still have no light.
I'm no good at anything electric so I'm not sure if I did this right or if I'm describing it correctly. From left to right the plug is as follows: [O O O O] green, red, black and light purple. My little test light lit up on the two outside holes but not the two inner. What should have happened? What else can I look at? Any other ideas or hints?
Thanks, Michael
I'm no good at anything electric so I'm not sure if I did this right or if I'm describing it correctly. From left to right the plug is as follows: [O O O O] green, red, black and light purple. My little test light lit up on the two outside holes but not the two inner. What should have happened? What else can I look at? Any other ideas or hints?
Thanks, Michael