I have been picking out spares to let go that I have held onto for a while. I have an R380 v8 bellhousing and a gems flywheel I really don’t need. The bellhousing is greasy but otherwise in good condition. The flywheel is from a flood salvage D1 and I’m thinking water got trapped in the bellhousing as it’s fairly rusty. I believe some sand / bead blasting will clean up the backside and resurfacing will get the disc side back to usable.
If someone here is REALLY interested in either, let me know. $300 for the bellhousing and $200 for the flywheel if you take both. I fully understand any hesitance on the flywheel. I could take it to a machine shop and get it resurfaced and bead blasted and add that to the cost.
If someone here is REALLY interested in either, let me know. $300 for the bellhousing and $200 for the flywheel if you take both. I fully understand any hesitance on the flywheel. I could take it to a machine shop and get it resurfaced and bead blasted and add that to the cost.