LR3 Litft

M

Marco-r-s

Guest
Know somebody thinks or possibility to lift the LR3?
The only one i know is www.matzker.de but i don?t like him!!!
The LR-Dealer can configur the Subsession with the Testbook, so normaly he can also lift it, or not?
Or change to spirngs, ther i found +2", but need i then other Shocks?

Byby Marco
 
T

tony bennett

Guest
I look forawrd to seeing your finished result.
Can't you put spacers under air suspension? I though that you could rather than ripping it out and replacing it.
 
T

TN-LR3

Well-known member
Sep 17, 2005
551
0
Nashville,TN
i believe you could trick the computer to stay in off-road height. If so thats a 3 inch lift basically over normal driving mode
 
M

Marco-r-s

Guest
So, and how you can trick it?
With the LR configurationmode it maks problem and doesn?t work!
 
Eric N.

Eric N.

Well-known member
Apr 20, 2004
3,980
0
Falls Church, VA
Don't the rear axles pass through the frame rails.... That right there will limit the amount of lift you can do.. I'd set it on your highest setting and see how close those get to the frame rails..
 
M

Marco-r-s

Guest
This link is onlay in German!
Thake an onlinetranslator! So i make it sometims!
 
Eric N.

Eric N.

Well-known member
Apr 20, 2004
3,980
0
Falls Church, VA
haven't really looked that closely at them but, could you do a body lift on it or is it unibody? That at least would do away with the issue of the axles going through the frame and you could fit larger tires.
 
Last edited:
cts

cts

Well-known member
Jul 3, 2004
151
0
48
Norton, VA
that would defeat the entire idea of the lift...GROUND CLEARANCE! it has a truck frame with a unibody on top...it's a car and a truck....don't think you could lift the body...
 
Eric N.

Eric N.

Well-known member
Apr 20, 2004
3,980
0
Falls Church, VA
cts said:
that would defeat the entire idea of the lift...GROUND CLEARANCE! it has a truck frame with a unibody on top...it's a car and a truck....don't think you could lift the body...
Click to expand...

Well, not really since larger tires will give you more ground clearence... I guess the sawzal to the wheel wells would also work if a body lift won't..
 
Last edited:
J

JohnGA

Guest
I'm confused how is it a truck frame with a unibody? I was always under the impression that a unibpdy just meant the frame was integrated into the body?
 
Leslie

Leslie

Well-known member
Apr 28, 2004
3,473
0
52
Kingsport TN
JohnGA said:
I'm confused how is it a truck frame with a unibody? I was always under the impression that a unibpdy just meant the frame was integrated into the body?
Click to expand...


Normally, yeah.... but with the new Rovers, Rover basically built a unibody, then stuck it on top of a chassis.... That's why they're so danged heavy.




-L
 
A

AndyThoma

Guest
My Audi allroads uses airbags to lift it like 4.5 inches in offroad mode. Problem is that mode is only in use on speeds 25mph and below. The reasoning is to protect the cv's at the angle of that higher speed offroad. Or at least what an audi mechanic told me. Might be the same issue with the lr3? Does the lr3 lower at speeds?
 
You must log in or register to reply here.
Top Bottom