Hey Kavic,
i have one on my 01 HSE.
it looks like most of the parts are there from the picture Jeff posted.
couple things you will need...
1. Plastic cover (its not pictured so i dont think it has one) i believe that these bad boys run a few hundred dollars... yeah i know its just plastic... but IMHO i think the cover really makes the finishing touch to the winch mount... the whole winch setup is totally stealthy when the cover is on
2. you will need to get 4 brand new 7/16 x 5" bolts GRADE 8 or better. NOTE depending on where you live these little buggers can be hard to source...everyone one has smaller or longer bolts of grade 5 or less. But for some reason i couldnt find these at any of the local hdw stores. i had to go to a specialty industrial hdw store
3. Yes the mount is meant to be used WITH the factory brush bar
4. this is a job for a do it your selfer... but an involved one. it requires removing the front end of your RR... and cuting two slots in the bumper as well.
In the end you will have a BEAUTIFUL winch mount that is VERY stealthy. 99% of the folks who look at my rig never notice that i have a winch on the front. i think LR did an Excellent job on this.
i have promised John at
www.rangerovers.net a tutorial on how to install it... but i have been a little busy at work... i will try and post it sometime this week. good luck!!!!
KEN