Wiring lights on a Safety Device Rack
- Thread starter Leigh
- Start date
Since Dweb is in a state of flux, try this link:
http://68.49.91.161/lights
If that does not work; try this:
https://www.expeditionexchange.com/hella/
and for power:
https://www.expeditionexchange.com/audiopipe/
If you post questions here, try to be more specific:
#1 D1 or D2?
#2 What kind lights?
#3 What do you want the system to look like? (read: LR look for aftermarket switching)
#4 Where are you using these lights? Yes it matters.
#5 How do you plan on powering these lights?
Answer these questions and much help you will receive.
Paul
http://68.49.91.161/lights
If that does not work; try this:
https://www.expeditionexchange.com/hella/
and for power:
https://www.expeditionexchange.com/audiopipe/
If you post questions here, try to be more specific:
#1 D1 or D2?
#2 What kind lights?
#3 What do you want the system to look like? (read: LR look for aftermarket switching)
#4 Where are you using these lights? Yes it matters.
#5 How do you plan on powering these lights?
Answer these questions and much help you will receive.
Paul
Since no one has responded yet, and I need to wire mine too, I will steal this for my own benefit... I have four IPF lights to wire on my DII. I would like to use as much of a factory look as possible. I would also like to be able to turn on the outside two and the inside two independently. Can you give me any advice?? Thanks in advance.
Leigh... Honestly, I don't know how well they compare.. The previous owner of my truck had already mounted the 4 IPF's, but had not wired them... I would be curious how they stack up to the hella's though..