Author |
Message |
   
Will Bobbitt (Rkores)
| Posted on Friday, November 22, 2002 - 05:49 pm: |
|
I have been trying to find out the sources of my vibes, and I have a few thoughts. When I accelerate, it sounds like I have an exhaust leak right around the transfer box, and it has been doing this for a long time. I do have an exhaust leak, but it is where the pipe goes into the first resonator. When I put it into nuetral and rev the engine, it doesn't make this sound. U-Joint maybe??? The other this is, I put in poly blues almost a year ago, and I was looking at the front radius arms the other day, and there is a small gap about !! that far inbetween the outside of the bushing, and the piece that comes down to bolt the arm on to. I hope that last part made sense. Any ideas? Feel free to call if want. Thanks, Will Bobbitt [email protected] (336)-971-9336 |
   
muskyman
| Posted on Friday, November 22, 2002 - 05:58 pm: |
|
will loose radius arms will allow misalignment and changes in drivshaft geometry. this will cause vibes you may need to get some big washers/shims to get them tight if the big bolt is bottomed and its still not tight. |
|