| Author |
Message |
    
elr
| | Posted on Thursday, April 11, 2002 - 01:04 pm: | 
|
can anyone give me directions to get inside door panel off? I have to get to a ratle that is driving me CRAZY! |
derek (Vortrex)
| | Posted on Thursday, April 11, 2002 - 01:38 pm: |
|
remove screw holding on the plastic plate for the door release.
remove two 10mm bolts holding on the door pull.
get a door trim removal tool from the parts store for $13 and use to pop the door panel clips out. |
elr
| | Posted on Thursday, April 11, 2002 - 02:26 pm: |
|
thanks - where would the door clips be located? Do I need new clips after the door panel is removed? |
derek (Vortrex)
| | Posted on Thursday, April 11, 2002 - 02:36 pm: |
|
clips are all along the outer edge of the door panel, on the underside of course. just put the tool in the edge of the panel and pop them out. if you remove it with the tool, you probably won't break any clips. if you try and screwdriver or some other tool, you probably will. I took mine off last week with no broken clips. |
|
Closed: New threads not accepted on this page