Author |
Message |
   
ccdm3
| Posted on Friday, May 10, 2002 - 10:53 am: |
|
I am changing my drive belt this weekend. One problem...I don't know how! Any help would be appreciated. (pics, links, etc..) I am also going to try to get to the front brake pads and rotors. Same story as above! Thanks Chad |
   
David Dryden (David914)
| Posted on Friday, May 10, 2002 - 01:31 pm: |
|
Here's the diagram...
How to replace it is pretty obvious once you look at it. If not, let us know. David |
   
Blue (Bluegill)
| Posted on Friday, May 10, 2002 - 01:42 pm: |
|
Just examine the belt before you take it off. Replace the same way. Here's another pic. Loosen the tensioner (#1 in the diagram, yellow arrow on my pic) and you'll be able to slip the belt off.
 |
   
Dee Cantrell (Disco_Dad)
| Posted on Friday, May 10, 2002 - 01:46 pm: |
|
Dont loosen the nut jut rotate the tennsioner downward and that will slacken the belt. Dee |
   
ccdm3
| Posted on Friday, May 10, 2002 - 01:49 pm: |
|
Thanks all! Any such advice on the brakes? Chad |
   
anon
| Posted on Friday, May 10, 2002 - 03:46 pm: |
|
same as any other brake job, just don't over extend the brake line |
|