| Author |
Message |
    
jmon
| | Posted on Friday, June 28, 2002 - 09:00 pm: | 
|
a while back the turn signal lights stopped flashing and went to the just staying on for a few seconds whne setting the alarm. turned out i needed new batteries. Replaced the batteries, but how do i reset the remote and alarm so the lights do their flashing while setting the alarm? thanks |
dchrismon
| | Posted on Friday, June 28, 2002 - 10:23 pm: |
|
Take a look in the tech section I believe there is a section on how to program remote... |
ButchS
| | Posted on Saturday, June 29, 2002 - 12:26 am: |
|
Dealer service advisors should help you reset the alarm with the remote free-of-charge. Mine got fixed at Pioneer Centre, San Diego. |
jmon
| | Posted on Saturday, June 29, 2002 - 12:55 am: |
|
aboout three weeks ago someone had it on here..i looked through the archives and could not find out..anyone have the quick answer for me..i know it has something to do with just hitting the remote button in the right sequence..anyone? |
Joey
| | Posted on Saturday, June 29, 2002 - 01:27 am: |
|
Suynchronizing the remote is easy, just open en close the locks with the remote a few times .
Joey |
Kingfish (Kingfish)
| | Posted on Saturday, June 29, 2002 - 12:35 pm: |
|
You need to remove the batterys from the remote, then hold down the remote button for about 5-10 seconds. Put the batterys back in and the lights should flash again. |
John Averett
| | Posted on Saturday, June 29, 2002 - 01:59 pm: |
|
The way to reprogram the remote is to hit the lock button four times in a row.
John |
|
Closed: New threads not accepted on this page