| Author |
Message |
    
Matt
| | Posted on Sunday, June 30, 2002 - 09:05 pm: | 
|
Where does the Bearmach skidplate bolt up to on the DI? Steering skid plate that is.
Matt |
Blake Luse (Muddyrover)
| | Posted on Sunday, June 30, 2002 - 11:41 pm: |
|
it has two stabilizers that bolt up in the same holes that the factory brush guard bolts up to and one hole about 6-8 inches behind those.
put the stabilizers on the truck before you put your skid plate on them or you may not be able to mount it
I had to put screws in two opposite holes and then get a screw driver to pry the 3rd hole to get them to line up and the 4th hole i had to actually jack my truck up on the skid plate, using a floor jack, to get the 4th to align properly
this skid plate is very very stout i had a guy who fixed my rover's bearings, many may remember the saga, and he said it was the stoutest one he's ever seen and has the gash on his head to prove it 
yours might align perfectly but thats my $0.99 |
|
Closed: New threads not accepted on this page