Put in power steering fluid in instea... Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2002 Archives - Technical » Discovery » Put in power steering fluid in instead of ATF how should I flush it out « Previous Next »

  Thread Last Poster Posts Pages Last Post
  ClosedClosed: New threads not accepted on this page        

Author Message
 

jerry
Posted on Wednesday, July 31, 2002 - 06:50 pm:   Edit Post Delete Post Print Post

OK I'm a dummy did not read the book what should I do to flush/clean out the P/S pump ect.

thanks
 

M. K. Watson (Lrover94)
Posted on Wednesday, July 31, 2002 - 07:32 pm:   Edit Post Delete Post Print Post

dont feel so bad, i did the same thing, i used a syringe (sp.) to get the resovour empty then open the bleeder on the steering box and let it run til i saw red. i then let run a bit and emptied it again and continued the process til i saw nothing but red. took about two quarst (actually a lil more i was over cautious). its messy as heck but it worked.
mike w
 

jerry
Posted on Wednesday, July 31, 2002 - 07:49 pm:   Edit Post Delete Post Print Post

thanks mike,

where is the bleeder located on the steering box,
and did you open it while the motor was on or off.
I have ran it about a week do you think it will cause any problems.

thanks

Jerry
 

jerry
Posted on Wednesday, July 31, 2002 - 09:51 pm:   Edit Post Delete Post Print Post

found the bleeder sucked out the resivour and dleed off all the nasty stuff(brownish redish greenish)flushed till red. cleaned the mess. test drove and lo and behold it worked fine even got rid of the vibe in the stering now it feels like its got a vibe in the rear but new tires tomorrow should fix that.

thank you

Jerry
 

derek (Vortrex)
Posted on Thursday, August 01, 2002 - 01:09 am:   Edit Post Delete Post Print Post

is there a less messy way to drain all the PS fluid besides letting it run out of the bleed screw and onto the floor?
 

Scott Hayes (Scott_H)
Posted on Thursday, August 01, 2002 - 10:23 am:   Edit Post Delete Post Print Post

I actually did this before, and went to the dealer to have them deal with it. They told me not to worry about it, that PS fluid was fine. And I was out of warrenty, so would have paid. FWIW
 

Robert Sublett (Rubisco98)
Posted on Sunday, August 11, 2002 - 07:39 am:   Edit Post Delete Post Print Post

Were is the bleeder on the steering box? I want flush mine today. I haven't been outside yet to look but is it pretty obvious to find? Later.. Robert S
 

derek (Vortrex)
Posted on Monday, August 12, 2002 - 01:22 am:   Edit Post Delete Post Print Post

right on the top of the steering box when looking down from the top.
 

ken nishikawa (Scubaman99)
Posted on Monday, August 12, 2002 - 09:07 am:   Edit Post Delete Post Print Post

if your Disco is like mine....

just drive it around for a few days... when the fluid spots beneath your rig stop... refill with the proper fluid.

i keep telling my wife its a feature not a problem. its the rigs way of constantly flushing out the old fluid.
 

cartner
Posted on Monday, August 12, 2002 - 10:28 pm:   Edit Post Delete Post Print Post

Prevents rust. This was designed in around 1948.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration