Author |
Message |
   
Bentvictor
| Posted on Tuesday, August 13, 2002 - 01:52 pm: |
|
What size copper washer do I need for the drain plug? Need to change the oil, and want to have correct one on hand. |
   
Bentvictor
| Posted on Tuesday, August 13, 2002 - 10:48 pm: |
|
Is this a dealer item? Does anyone have the size so I can just get it at an autoparts store? Can I skip the replacement? |
   
Frode H�bertz Haaland (Discofrode)
| Posted on Wednesday, August 14, 2002 - 02:22 am: |
|
If you skip replacement, you'll have to torque it more than last time, so is not convenient - or it will develop a drip. I'd get one from the local stealership, go to autostore, and there get a handful of them... I run 200tdi, so are of no help as I guess You're V8. Frode |
   
Mike B.
| Posted on Wednesday, August 14, 2002 - 07:10 am: |
|
From my own measurements: ID: 21mm or 26/32" OD: 27mm or 1 1/16" Thanks, Mike B. |
   
Bent Victor
| Posted on Wednesday, August 14, 2002 - 04:09 pm: |
|
Thanks for the guidance! It should save two trips to the parts store... |
   
Bent Victor
| Posted on Saturday, August 17, 2002 - 01:24 am: |
|
I used a 22mm washer, and it seems fine. It was thinner than the one I took off, but I have spotted no leaks. I wish someone had told how hot the oil would be. I had to type this epistle with my nose. |
|