Parts cross reference needed-cam gear...

Log Out | Topics | Search Moderators | Register | Edit Profile

Thread Last Poster Posts Pages Last Post   Closed: New threads not accepted on this page

Author Message   Paul T. Schram (Paulschram) Posted on Friday, September 27, 2002 - 12:33 pm:    I remember having seen a thread where someone said they bought a timing chain from Summit. Obviously, Summit doesn't list a cam gear setup for the Rover in the catalogs... Anybody got some numbers for me? Is it the same as for a SBC? That would be making it almost too easy! My truck is still making that annoying noise and I am considering an oil pump replacement and while I'm at it, I might as well replace the cam drive. Won't be much longer and I'll not only have a new engine, but new ancillaries too! Thanks, Paul   Dee Cantrell (Discodad) Posted on Friday, September 27, 2002 - 01:50 pm:    Paul i tried to find that out a month ago i was going to upgrade the timing and cam in my 4.0. I even asked Chris Crane at RPI if Cloyes made one for the 4.0. No luck with it. The serp belt timing cover i belive, wont fit the wider double roller types   Mike Cox Posted on Saturday, September 28, 2002 - 09:02 am:    Not to long ago I replaced the Gears and Chain on my 3.9 with the Cloyes set-up. Are you sure there was a change in that area of the engine when it went from the 3.9 - 4.0? I got it from a local parts shop for $95. Summit would probably have the same chain though. Mike   Dee Cantrell (Discodad) Posted on Saturday, September 28, 2002 - 11:38 pm:    Thats what Chris Crane at RPI told me i had the Coyes in my 3.9 and i wanted to upgrade the Disco to that durring the top end rebuild...   Paul T. Schram (Paulschram) Posted on Sunday, September 29, 2002 - 05:13 am:    This might be one of those times I need to be more specific, my truck is a '95, 3.9, serpentine, with distributor. Mike: Got the mfgr and part number by chance? Paul   Ali Posted on Sunday, September 29, 2002 - 07:50 am:    Pardon my ignorance here, but is there another # for an older 3.9 timing gear set from Summit? Mine needs replacing asap! I thought the Summit set covered all engines. Thanks.