Today while I was doing some work on the truck I decided to pull some line out on the winch and run it a little to make sure everything was ok. I guess it is a good thing I did, becuase it is refusing to work. I can hear the solenoid clicking when I move the switch to both in and out positions, also I can move the clutch to freewheel and pull the line out, but thats it. I have a Warn XD9000 on a discreet mount on my DII. The solenoid box is located in my battery try.
I did pop the top off the solenoid box and tighten each connection to see if anything was loose, I also tried moving the cables where they connect on the winch back and forth to see if maybe some corrosion was blocking the connections. I haven't had any luck, and I was just wondering if anyone had any tips that they could share with me.
Obviously taking the winch out and tearing it down is a lengthy process for me, so I wont go down that route until I have the time.
Thanks
-Stuart
I did pop the top off the solenoid box and tighten each connection to see if anything was loose, I also tried moving the cables where they connect on the winch back and forth to see if maybe some corrosion was blocking the connections. I haven't had any luck, and I was just wondering if anyone had any tips that they could share with me.
Obviously taking the winch out and tearing it down is a lengthy process for me, so I wont go down that route until I have the time.
Thanks
-Stuart