Oil pressure relief valve Cap/Plug Removal

Is there a trick to removing the Cap/Plug on the Oil pressure by-pass valve and Oil pressure relief valve?

Got the cir-clip's off no problem but can't get the rest out.

Tried tapping somewhat gently on the case with a rubber mallet but nothing.

Soaking in PB Blaster now.

XCELLER8 said:

in theory it just slides out.....probably just gunked up.
try pushing it back in just a little and use a strong magnet to help pull on it

Click to expand...

Yeah i got one out with a looong thin dowel - but i may have to tap a screw into the other and pull it out - I've found this to be others remedy.

Also the RAVE photos do not represent what comes out very well...
this is what you get on each side when apart


Also the O-Ring size for replacement is - 19mm x 1.5mm