Recent content by cornercase

I'm very interested in these axles. see my pm. thanks!

Hi all. I'm looking for front and rear 24 spline Truetracs and front and rear sets of 4.11 (or similar, 4.10, 4.14, etc) gears for my D2. I'd consider buying them installed in the 3rd members as well but I'm happy to piece them together too. Thanks!

Hi all, I'm looking to get a set of caster corrected radius arms for my D2. If anyone is selling them used or has a set they're not using, let me know. Thanks!

Thanks for the info, I'll take it under advisement. Were they completely solid or did they have a tube-shaped poly bushing in them?

Visually they look fine but I ordered a new set anyway since I don't think they've ever been replaced. I'm going to have to unbolt them to get the engine mounts lined up, so I'll be prepared for surprises. Buying genuine.

Because I've gone through two sets of motor mounts, the most recent of which was less than a year old. While I do think I need to realign the drivetrain to make sure I'm not putting shear stress on the mounts, I'd rather also throw something in there that will keep the motor within a small...

Hi all. I'm looking for a set of captive engine mounts for my Discovery 2. I've seen the Blacklisted Engineering and Proud Rhino ones. Let me know if you've got a set to sell me.

Gotcha. Well, I'll keep my eye on these. I just had to do a sizeable repair on my daily driver so I'm a little too poor to pull the trigger on lockers right now but I would love this setup. No need to wait for me to sell but in a month I'll reassess and see if they're still available.

Do you know if I can set the lockers up with 4.11 gears instead of the 4.75s? I'd consider taking them and the axles and get a new set of gears since I won't be running tires that will match those.

You're correct on that. Mine had it but because of the way it cracked, I'll fundamentally need a new airbox lid or I'll have to JB weld part of the crack. Since the clips on the airbox itself are broken too, I haven't decided if I'll replace the whole thing or fab a fixture for the lid and for...

Hey all, I just wanted to loop back since I got under the hood this weekend. I made a little zip-tie harness to pull the airbox hose onto the MAF. I couldn't get it to seat perfectly, but it was much tighter than before. I put 150 miles on it this weekend and the whistle is almost completely...

To clarify, are the TT housings specific to a gear ratio? I was working under the assumption that I could just grab a set of TTs, grab a set of 3.90s, and be off to the races. If the diffs have to be matched to the gear ratio and 4.11s are more common, I'll run that instead. Thanks for the info.

Yeah, I know it's not common for these to show up used but figured i'd try to shave a few $$ off the price. I'd happily run air lockers or truetracs. As for specific, there don't seem to be that many options for the 24 spline Rover axles, unless I'm missing something. Are there really other...

Hi all, I'm looking for front and rear Truetracs and 3.90 gears for my Discovery 2. If anyone is selling or looking to upgrade to air lockers, I'd be happy to take your old stuff off your hands. I'd consider other combos of ratios and diffs depending on the price and kit. I'd also consider...

Will check that as well. And as for those clips, I'm just going to fab up some sort of clamp that doesn't require the clips. I can foresee continuing to break them over and over. I unfortunately didn't have a chance to try any of this and I'm headed out of town for a week but I'll report back...