Seals can fail for a rew reasons. The most common reason is too much fluid. Seals can be slightly damaged during assembly. Especially seals on the pump. Obviously if you're leaking fluid, that means fluid is missing in the transmission. having less fluid than ideal, means the fluid you do...
Excellent suggestion, you can even use rags to accelerate the evaporation of water by soaking up with you can, especially in the manifold. Also inspect other electrical connections to make sure they are dry. As long as you give everything time to dry, you should be ok. Depending on what you...
need a bit more information. does the problem show during initial warm up ( open loop/closed loop)? After long trips at constant RPM? Are you having any other drivability problems? As already mentioned, one of the most common, simplest causes for a lean condition and rough idle is a vacuum...
check out www.aeswave.com
have some pretty cool stuff.. you can use the autoenginutiy program on a palm using bluetooth and walk around the vehicle while recording and viewing data
yup, that is not normal. As your engine warms up, and heats the water above 212? degrees it wants to boil and expand. However, your radiator cap keeps the system pressurized, and in turn raising the boiling point. Rad Caps are rated in PSI and Kpa, usually 9 - 10 PSI is a normal rating for a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.