Search results

Set of home made sway bar disconnect never used $75

I have a lt230 with diff lock out of a 2004 dII with factory shifter. Cable was cut when removed but have a couple non locking cables that could be made to work. Located in eastern MA . I?d like to get $400 for the t-case and shifter but make an offer and we?ll talk. Cheers

Hey guys, just picked up an 04 t case withe cdl lever. The problem is the cable was cut at the junk yard. I have a hi low cable but need the cdl cable. I know that you can use the hi low cable And make a new bracket. I would rather use one of the right length. Have any I've you guys found a...

Hey guys, just picked up an 04 t case withe cdl lever. The problem is the cable was cut at the junk yard. I have a hi low cable but need the cdl cable. I know that you can use the hi low cable And make a new bracket. I would rather use one of the right length. Have any I've you guys found a...

Hey guys, just picked up an 04 t case withe cdl lever. The problem is the cable was cut at the junk yard. I have a hi low cable but need the cdl cable. I know that you can use the hi low cable And make a new bracket. I would rather use one of the right length. Have any I've you guys found a...

Hey guys, just picked up an 04 t case withe cdl lever. The problem is the cable was cut at the junk yard. I have a hi low cable but need the cdl cable. I know that you can use the hi low cable And make a new bracket. I would rather use one of the right length. Have any I've you guys found a...

Looking to buy a pair of jate rings. Wide version preferable . Thanks

So my power steering was making a wurring sound every now and then with a slight vibration like feeling in spots while turning at slow speed. This happened mostly in reverse right after startup. Finally the pump let go. The gasket between the two halves let go. So I got a brand new replacement...

So I have already installed the 229 in my 03 DII . Now I am in break in mode for the next 500 mi. This easy driving leaves me plenty of time to think about what I am actually gaining with this cam. Does anyone actually know how much HP and ft/lbs we are gaining with this cam? I can tell a...

I came across a web site called MEZ.co.uk about tuning rovers. They suggest that on the Thor Motronic intake (Bosch dII type) you can put a larger throttle body on for more power. Stock is 68mm i guess and they suggest a 71.5mm or one from a Jag. Has anyone here done this ? Would this be a...

I am installing new piston rings that I bought from D&D (Haystings brand). My problem is this, I checked all ring gaps in cylinders. My results were odd. The first compression ring gaps were all over spec. Per rave the gap should be between .30mm and .50mm, mine were all over .50mm except one...

Does anyone know what inconsistency mark at d&d is talking about regarding the 230 cam? I guess that like 5% of the blocks need machining for that cam. I could be safe with the 229 but am curious about the 230. PT swears by it so I'm very curious.

Looking for black duragrain seat covers to fix the cracked shit on my truck. Needs to be in good shape, no rips.

I need to get a torque wrench for my engine rebuild. I'm looking at either CDI (owned by Snap On) or precision instraments (also makes wrenches for snap on. l'd like to get a split beam because ease of use. I can't seem to find one that goes low enough for engine work I.e 5ftlbs and up. So it...

Just wondering what bumper is on lucky8's white DII?

I am trying to re-work a 03 t-case lever to have the cdl function. I have a few ?'s. On the ashcroft cdl lever, it apears to not have the same closed in cradle, at least according to the pic on their website. My ? is it ok for this cradle to be open like that or should it be sealed like the...

I am trying to rework a standard 03 t-case lever into

Making some disconnects like the ones from Hi Country. Seeing how I don't have their dimensions, I'm using the stock measurements. My question is, since my truck is lifted, should I increase the length a bit? What do you guys think?

I am planing a head job so I am going to do a cam at the same time. I am going to by the Crower from D&D. My question is two part. 1. What cam profile do you guy's who have put them in suggest. and 2. D&D says you have to use Crowers cam saver lifters , do you think this is a must? I curently...

Hey has anyone tried to fit the smitybilt seat covers on a dII? I know that their for a jk but they are very nice looking covers. They look very military like. Just wondering.