my 00' DII cuts off at idle. i have to press the gas pedal to keep the RPM's up to keep it running while stopped. however, when i accelerate and get going, it runs fine. the SES light is on, but i have not yet had the codes pulled.
any ideas on what could be causing this?
thanks in advance.
My 00' D2 has had a rough and low idle for a few days. Today I can't keep it running. When I come to a stop, it cuts off. The SES light is on and the codes are regarding O2's. I have to give it gas to start and keep an idle.
Any thoughts on the culprits?
How many miles can one really get out of a d1 or d2?
What's the most miles you guys have ever seen on these trucks?
I am looking at a d2 with 200k on the clock, but the damn thing runs great. Needs a couple o2's and some tires, but nothing else really.
Quick question. I bought a used radiator from Will T, and was wondering if there is anything I should do before installing it? Flush it out with a hose, etc.
If you've read my previous posts about the low coolant issue, you'll remember I said there was a small leak. Well, I located the small leak and it was at the tube going from the radiator to the expansion tank.
To my surprise, it was leaking due to the plastic "nipple" from the radiator to the...
About six months ago I replaced all the O2 sensors. A couple days ago, my SES light came on, so I stopped by Autozone to get the codes read. Codes thrown were P0134 and P0171.
I remember the guys at the shop telling me that I should go ahead and replace the MAF given te age and mileage of the...
Since I have to wait on my drive shaft to come in, I've decided to install a used AC blower and motor. Mine was going in and out. I replaced the entire assembly. I got one from Marty that had everything on it still...relays, etc. it is pretty much a plug and play once you take the old one out...
I pulled the front drive shaft out if my 2000 D2 and it needs a new front shaft. I will post pics later. However, with the driveshaft removed, the truck will not move... Drive, reverse, nothing.
Why? I ran through the gears and tried high and low gear. Nothing.
Help!
My 2000 Discovery has had some drive line vibrations since I bought it, but has seemed to get worse over the past few days. It is pretty bad from 15-30 mph, but then goes away. (mostly)
Any thoughts on potential problems? I crawled under the truck and nothing seems loose, broken, etc.
I don't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.