I love your posts D...
No. Right now I don't have any wheels. I don't even own an LR3. Working on a rig for SEMA this year is all...exploring options.
Can't say for sure on the exact weight but I can tell you the beadlocks on my rig weigh less than the heavy aluminum wheels I've muddled...
Not sure what you mean....? Standard locks only lock on one side (outer) and the tire comes off such. If your talking about just breaking the tire off setting it under the truck and using a hi-lift on the trail while pushing down on the sidewall breaks it....
To my knowledge no one is making...
Working with a wheel manufacturer to produce a set of 17" beadlock wheels for a SEMA LR3 we're doing. I'm curious if any others would be interested. The thought would be a simple black bell steel wheel with a outer lock.
I know LR3's might not go into harry enough terrain to warrant locks...
This is MUCH different that Urbans in person. Four front light tabs, two rears and a rear cb antenna mount as well. Just not pictured.
Again, hi-lift doesn't fit on the rear section and we wanted it open.
I hate it more than I like it.
I get that all the time... :)
Thanks for the critisism D. The floor is level. The 3/4 rear section is about 1.5" lower than the front basket. At first it looked odd too but after spending time with it I really like it. It allows full function of the...
How does it mount?
Really good double-sided tape. :) It has eight secure points..
Got a pic from the side?
No, it's a SPY photo... Sorry, only the one for now.
Where is the rear-most top rail?
There is no rear-most top rail. It's tailed down with the back open for rear top loading...
Hi all,
We're looking for an LR3 to prototype a roof rack. We would need the donor to either come to the shop for the day and hang three or so times or drop it off and leave it for a full two days.
We're willing to offer a 50% discount off the first production run.
Please PM me.
Thank...
One set of rear RTE 2" aluminum lift blocks. Just the blocks. You will need hardware. $75.00
One set of 03-08 Range Rover Mud Mats. $50.00
Both items are used but in fine condition. Will ship for cost of UPS and time. Located in Tampa, FL.
surflinxkiosks@yahoo.com
I have searched plenty on several sites but cannot find any information regarding an aftermarket fuel pump in a D2. I myself have used the Airtex or Master pump in several D1's and Rangies without fail.
The D2 I currently drive has about 190k on it and the fuel pump has not died yet but I am...
I'm torn on rebuilding this 3.9 "all the way" because I don't know if I'll keep this truck for long. On the other hand it's a chance to bring an engine down and build it myself. And then there is the fact that I could swap it into my Volvo P1800 and put a diesel in this truck once that's done...
Thanks PT. Here's a shot of the DS head once removed.
Before I put all this back together, whats the best way to clean everything down in the valley and on the piston heads?
Thank you guys. I've identified that Rovers North sent me a D1 piece rather than D2 so the notch that rests and secures the flange on top of the nipple is 90 degrees to the wrong direction.
Looks like I'm SOL until they can find me the right DII piece.
Appreciate the feedback and prompt...
Thanks guys, I'm leaving it for the night and will look at it in the AM. If you can get some photos or description of yours that would be cool.
Two things-
A) I don't my bracket has as much lift/bend (the one on the nipple) as that one from 4x4ag. This is a genuine LR part...
B) I cant...
Hi everyone
I searched but couldn't find any pictures on CDL installs at the nipple detail level. Something isn't right here (see photo) do I have the bracket in the wrong spot? Its as though the cable is too long in this position to get the stop nut on it (should there be one or two stops...
Honestly, not sure. Have to ask some others... I would assume they aren't that different. And as long as you have the brackets in your truck you should be ok.
Not new but barely used. This thing is amazing but I'm slimming down to a power tank and no longer need it.
I've also got -
Roller fairlead
DI ECU
DI rear view mirror
Equipe pan-hard rod (missing heim-joint)
Check plate DI console mat
Not sure what the compressor is worth used (barely) -...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.