How did you drill your swivel balls? DIY or machine shop?You should have bought mine. I ended up redrilling the swivel balls instead.
Dan
my bent tera firma arms are in a pile behind the shed. send the sticker and they are yours
maybe theyll unbend with some heat
I have a set but they are for gasoline only d1's.
The machine shop at work did it for me. I made a simple drawing in CAD with the pattern rotated 6 degrees.How did you drill your swivel balls? DIY or machine shop?
I wonder if they could be straightened in a press?
I wonder if they could be straightened in a press?
Then cut in half and sleeved with rectangular tubing?
I would try it on my own truck, not sure I would recommend it for the public.
I actually bought a set of tf arms from Randy Williams for my d2 that had been in an accident. One was fine but the other one was shaped like an s and was in 2 pieces. My friend who is a fabricator made a jig for the straight one, then we used a piranha to straighten out the bent one. Using the jig he made sure the bent one was straight and then gusseted the sides with flat stock to re enforce it. I wheeled it for 2 years with no problems. 75 on the highway and not even the slightest shimmy. Took about 2 hrs to do the work.
If your boy can do that why not just cut and gusset your stock arms?