A/C Fault - '98 P38

[agro1]

The A/C in my Rangie is saying that my blower motors are bad. Apparently the right side blower motor is prone to failure and when it sends a fault, it triggers the drivers side as well.
It's obvious the left side is fine because it blows strong, but it's clear that the right side is bad because it hardly blows at all.

Sounds like someone is getting lucky, eh ?

I've been told all you have to do is yank the glove box to do the R&R for the right side blower motor...Has anyone done this and if so, could you please give me some idea how it is done ? Thanks in advance

Luke

 

[P38MeMate]

See www.rangerovers.net for this fix.

 

[greendisco1]

To Replace The Rhs Blower You Need To Remove The Glove Box And 2 Lower Dash Nutts This Should Allow The Dash To Flex Enought To Replace That Motor Also Check The Blower Motor Relays Under The Hood Make Sure That There Not Burt Also Check The Fuse Box

 

[Steve83]

I'd recommend checking the underhood fuse block for burnt relays first. They're the front RH 2 yellow relays.