Air spring in rear

white stallion

Well-known member
Jul 5, 2006
86
0
Due to job loss had to park my disco for a while. when I went back out to get it it started right up but the air spring don't inflate what do I do?
 

riceybean

Well-known member
Jun 29, 2008
861
0
Vancouver, WA
Start Disco, hit the off road button, should beep at you and start rasing to "off road" height. Let it go untill it stops (if it does). If you want hit the button again to lower back to stock height. Now get some soapy water spray and start checking for leaks. This of course only works if your pump is functioning. I had to do all this until I just took it all out for springs. Ended up have the height sensors going out.


From owners manual.


With the engine running and all doors fully

closed, press the fascia-mounted off-road
mode switch (see illustration). A single warning
chime will sound, the off-road warning light on
the instrument panel will commence flashing
and the rear of the vehicle will start to rise. Once
the pre-set off-road height has been reached,
the warning light will stop flashing and
illuminate constantly instead. Constant
illumination will remain while the vehicle is
operating at off-road height.
To return the vehicle to standard ride height,
press the off-road mode switch a second time.
Note that a single chime will sound and the
warning light will flash while the rear​
suspension is lowered.

That will at least get you started in the trouble shooting.