Anyone parting out a DII? I need some ODDS and ENDS

BackInA88

Well-known member
Dec 6, 2007
392
1
Troy, Michigan
Here is a list of odds and ends I need for my 01 DII.
So if someone is tearing down a truck they can just toss this stuff in a box off to the side while your ripping the rest of the truck down.


A) 2 ~ 90 degree rubber hoses coming off washer pumps (for the 2 pumps in the wheel well, mine got wrecked from leaking trans fluid).

B) Steering box cover panel with mounting screws, the black plastic cover piece in the drivers side (left) wheel well, mine is missing and I think I tossed up a rock which holed my trans cooler which is why I need the item "A".:ack:

C) 4 ~ LONG trim panel spikes for the rear side window trim in the off white color, the long ones are the 4 closest to the rear door on both sides I believe?

D) 4 ~ button caps/covers & screws that are in the same rear window surrounds in the lower corners.

E) both visor chips if the screw covers aren't broken off them.

F) The little black mat that goes in the highest pocket of the drivers door.

G) Drivers side headlight with the city light socket and some of the wiring for this socket, about 8 inches. The hole were the city light plugs into my headlight is messed up as well as the socket. Looks like the PO just kept turning it until he broke everything! The wiring up by the socket is messed up as well, hence the need for 8 inches.:rofl:
Rover Connection has new lights with the bulb and socket for $90 but I am cheap.

H) Tan color binnacle with mounting screws, don't need the switches, PO broke the lower mounting hole and ran in drywall screws!:(
Which I'm sure he did while he was blocking off the ABS & TC lights.

I) The little center catch pin for the center console lid.


Ready to Paypal.

Steve
 

BackInA88

Well-known member
Dec 6, 2007
392
1
Troy, Michigan
cosmiccharlie said:
Check the For Sale section. I am pretty sure there are a couple DII part outs listed in there.

Edit: Here's one.
http://www.discoweb.org/forums/showthread.php?t=51019


Sent my list to 2 guys parting DII's than either the deal they had on the rig fell through or they changed their mind about doing the parting.:ack:

I can't believe no one here is parting rigs?
Should be pretty easy to just toss this stuff in a box while removing the big stuff?

Steve

:popcorn: