Anyone running 35's on a D2?
- Thread starter whatroad
- Start date
Luke Miles si running 35's on his D2.
He had to beat back the footwell to clear the tires.
He's at www.roverrepairshop.com
He had to beat back the footwell to clear the tires.
He's at www.roverrepairshop.com
I just installed 33 and i rub on my inner footwall but im on a 2in lift.With 35's your going to have to cut you fenders and sliders .
lutz said:
your runnning 33s on only 2inches??? so i should have no problem running a 285/75 r16s with 3inch OME and 1inch spring spacers? and NO fender trimming right?
10-4 on the quick reply...thanks....so minor trimming and they should fit yes?? with four inches of lift?
That does not look like a 2" lift at all...Colorado Scott said:
Also, what width are those tires?
Yes.roverboy03 said:
Last edited:
my 33's fit with a 2" lift...in the front. i kept slicing tires in teh rear, so i added a spacer. no problems since.
michaels said:
thanks for the info...wat size spacer did you use?? does the truck have a really offset rake now?
it must be my 4" BS on 255/85/16 here's a photochop of how much i need to trim with just 33's.
http://i18.photobucket.com/albums/b113/lutzg/fenderblackend.jpg
http://i18.photobucket.com/albums/b113/lutzg/fenderblackend.jpg
flyfisher11 said:
34/10.50 LTBs installed on RTE 3" with steelies with 4.25 offset. Only place I get a bit of rub on the sliders when turned just right and compressing. Not a big issue but will probably trim my sliders a bit.
flyfisher11 said:
are these the LTBs that acually measure out to just under 33"?
or are they a "true" 34?
Lee has 34x10.50 LTBs and they are smaller than my 255/85s...