brake line tee fitting

[post]

Where can I find a brass tee fitting to fit the bubble type brake line fittings? All I've been able to find are the flare "t" fitting for the double flare. I believe the brake line threads are 10x1.0.

The reason I'm asking is I'm finally swaping out my brake booster for the hydraboost unit, and in the process I removed the ABS unit( alot more room now) and I need a tee fitting so am able to get all my lines into the proportioning valve. so now I have everything pretty much connected except a couple brake lines untill I get a tee fitting. All help is appreciated.

thanks!!

 

[peter sherman]

http://www.fedhillusa.com/
you can try here good guys to deal with
http://www.paragonperformance.com/
good luck!

 

[post]

thanks man! they had the what I needed.

 

[peter sherman]

fedhill is a great place to deal with! Glad you found what you needed!

 

[justinhaaga]

try napa man, they got it all.

 

[post]

I was going to but they were closed, so I just ordered the tee from fedhill. I know I'm going to need one or two more fittings and Napa's going to be my first choice. Plus Napa made both my hydraulic lines pretty cheap in about 15minutes.