Codes

[knucklehead_vol]

P0300
P0303
These are a little confusing since one cylinder is misfiring.


P1415
Got this...I think.


P0130
P0132
P0134
Says Lambda sensor upstream B1 out of range.

 

[Tugela]

Do you have a specific question? From your post it's not clear what you want.

P0130 is upstream driver's side oxygen sensor. Replacements - at least for an AEL D1 (unclear what truck you have) - are cheaply found. Like here, for example.

Clarify what information you need and what truck you have and you might get some useful suggestions. Hard to help without some basic context.

 

[knucklehead_vol]

P1415 what is that? Just to be sure. Can the 0130 be affecting the 0303 or visa versa?

 

[discostew]

secondary air injection fault bank 2. Since its picking on the right bank only I would think its that check valve that sits on top of the pipes with a vac. hose to it. I guess it could be the vac. harness going to that side. Not to hard to get off so you could switch them side to side and see if you get a code for the other side. (p1412)

The p0130 is a o2 sensor malfunction on bank 1 so the p0303 could be dumping raw fuel on the o2 sensor and causing that. But its a stretch to think the o2 sensor would cause #3 misfire and none of the other cylinders on that bank.

 

[knucklehead_vol]

So why would #3 dump raw fuel?

 

[discostew]

So why would #3 dump raw fuel?

Most likely a spark plug wire. First thing you need to do is check for spark at the end of that wire with a good spark checker. Next possible thing in my mind would be a sticking exhaust valve.

 

[knucklehead_vol]

Think I got the misfire fixed. I don't think the spark plug was on good enough.

Does anyone have a pic of what 1415 is? Just want tomake sure I am looking at the right hose.

 

[knucklehead_vol]

Running much better. Just need to replace the o2 sensor and I should be good. And got the window regulator replaced.