D1 mantec snorkel template

[Chuckwagon976]

Anyone have a D1 mantec snorkel template? I know the the instructions suck balls, but I just need a starting point on where to cut.

 

[SavageRover]

You can print it up and it comes out full size so you can just line it up to mark it then cut.

 

[Ballah06]

Having done one myself a few years ago, just a recommendation (kind of a no brainer I suppose). Start cutting a smaller 'diameter' and then trim as needed. Worked great in my case just with a dremmel.

 

[Chuckwagon976]

Perfect, exactly what I needed, thanks Savage. Thanks for the advise Ballah.

 

[Ballah06]

You are welcome. One other thing, I would also recommend covering the area you are going to cut with masking tape.

 

[Chuckwagon976]

I have read that some people remove the fender, is that really necessary?

 

[Ballah06]

I have read that some people remove the fender, is that really necessary?

Yes. Simply because you have to run the hardware behind it; no way to just squeeze the stuff through. Nothing terrible about it if I recall correctly.


Just a random video that shows where stuff goes:


https://www.youtube.com/watch?v=8G3p6OzDzhI