D2 Off Road Bits

roverover

roverover

Well-known member
Feb 27, 2005
3,819
28
69
Lancaster PA
www.UsedLandRoverParts.com
I have a bunch of stuff from my old D2 and can bring it to The Annual

RTE Front and rear bumpers fresh powder coat $900 ea

2 x Hi Lift jacks 48" $50 ea

ARB Air Pump no switches $200

1 set of 265/75 Goodyear MTs probably 75% tread on Steel wheels with some rash $700

1 set of 5 315/70 MTRs on Mirage wheels lots of repairs to Tires and lots of rash on wheels I would say offroad only $350

I have a box of new Orange Soft Shackles $30/ea a few used Green ones $15/ea

Several TW drive shafts used fronts $200/ea

Not removed yet but could arrange shipping or pick up

Front axle housing built with sewer cap and pan hard raised $300
 
Last edited:
Blue

Blue

Well-known member
Mar 26, 2004
10,080
885
AZ
Interested in hawse and syn line, have any photos or more details?
 
Buddy

Buddy

Well-known member
Nov 6, 2006
2,839
1
Central NC
Details and pics on the TW Front drive shaft? How used, does it need to be rebuilt or are the joints still good? What size lift is it for? I assume it will work with a DI using the DII output flange?
 
seventyfive

seventyfive

Well-known member
Jan 3, 2010
4,280
100
over there
fishEH said:
"Set of QT brackets to externally mount front shocks actually for a D1 $150"
VERY interested in these, got a pic?
Click to expand...

This is not a good picture but you get the idea
http://smg.photobucket.com/user/seventyfive/media/E1473B0F-1936-475F-8F45-D8A3DDE23D29-2404-0000040594560F5C_zps66983959.jpg.html?sort=3&o=6

I had to buy the whole kit, but didn't use the axle mounts. 'IF' you can get a hold of denny doler he may still have the lower bits. The lower bits bolt to the axle via the radius arm mount ears. If you look closely, you'll see I just bolted then welded lower shock mounts from ballistic.

And at $150 you'd be crazy not to buy them.
 
fishEH

fishEH

Well-known member
Jan 26, 2009
6,930
203
Lake Villa, IL
seventyfive said:
This is not a good picture but you get the idea
http://smg.photobucket.com/user/seventyfive/media/E1473B0F-1936-475F-8F45-D8A3DDE23D29-2404-0000040594560F5C_zps66983959.jpg.html?sort=3&o=6

I had to buy the whole kit, but didn't use the axle mounts. 'IF' you can get a hold of denny doler he may still have the lower bits. The lower bits bolt to the axle via the radius arm mount ears. If you look closely, you'll see I just bolted then welded lower shock mounts from ballistic.

And at $150 you'd be crazy not to buy them.
Click to expand...

If these are them then yeah it's what I'm looking for.


Mike, do you know what the mount height is from the upper spring perch? I'd be looking to run my 11" Fox shocks. I can weld up lower mounts if need be. Thanks!
 
seventyfive

seventyfive

Well-known member
Jan 3, 2010
4,280
100
over there
I think it was exactly same as stock measurement. They were made to be direct replacement but for out boarding the shock.

Make sure randy has all the hardware, they should have the bolts, the misalignment spacers, and the reducers for the bolts.
 
primussucks

primussucks

Well-known member
Jun 4, 2012
73
0
North Dallas
TOM R said:
what are the soft shalckles rated? I will be at the annual with my fake camel d1 again
Click to expand...

I use the soft shackle as a rear view mirror ornament. I wouldn't suggest using it for anything more then that, although my hammock line was a hair short one time, so I did use it to extend a little bit.. I will say I didn't sleep as well that night knowing my body was 3 ft off the ground being held by the soft shackle.

When it comes to pulling a 5000 lbs vehicle with a 12k winch I'd rather stick with a proper recovery device..
 
fishEH

fishEH

Well-known member
Jan 26, 2009
6,930
203
Lake Villa, IL
primussucks said:
I use the soft shackle as a rear view mirror ornament. I wouldn't suggest using it for anything more then that, although my hammock line was a hair short one time, so I did use it to extend a little bit.. I will say I didn't sleep as well that night knowing my body was 3 ft off the ground being held by the soft shackle.

When it comes to pulling a 5000 lbs vehicle with a 12k winch I'd rather stick with a proper recovery device..
Click to expand...

You know these soft shackles far exceed to rating of your winch and your winchline, right?
 
Devildog01

Devildog01

1
Jan 25, 2010
3,544
4
your moms bed
primussucks said:
i use the soft shackle as a rear view mirror ornament. I wouldn't suggest using it for anything more then that, although my hammock line was a hair short one time, so i did use it to extend a little bit.. I will say i didn't sleep as well that night knowing my body was 3 ft off the ground being held by the soft shackle.

When it comes to pulling a 5000 lbs vehicle with a 12k winch i'd rather stick with a proper recovery device..
Click to expand...

lmfao. Thats funny because it's ignorant.
 
seventyfive

seventyfive

Well-known member
Jan 3, 2010
4,280
100
over there
roverover said:
I have a bunch of stuff from my old D2 and can bring it to The Annual

RTE Front and rear bumpers fresh powder coat $900 ea

9.5TI Warn winch $600 w/ syn line

Aluminum Hawse $25

Set of QT brackets to externally mount front shocks actually for a D1 $150

2 Hi Lift jacks 48" $50 ea

Front ARB w/ 4.10 gears $1200

Set of front and rear Ashcroft axles $500 and yes they click

ARB Air Pump $250

Viair Air Pump $300

1 set of 265/75 Goodyear MTs probably 75% tread Steel wheel with some rash $700

1 set of 5 315/70 MTRs on Mirage wheels lots of repairs to Tires and lots of rash on wheels I would say offroad only $350

New Syn line $200

Used Syn line $100 Amsteel Blue

I have a box of new Orange Soft Shackles $30/ea a few used Green ones $15/ea

Several TW drive shafts used fronts and rears $200/ea

Not removed yet but could arrange shipping or pick up

Front axle housing built with sewer cap and pan hard raised $300

Front and rear Detroit/TT 4.10s $1800
Click to expand...

bump
 
You must log in or register to reply here.
Top Bottom