So i just went through the trek of doing Rovertyms 3" lift. Looks great but i was driving around for a bit then 3 miles down the road my ABS, TC, BRAKE, and HDC lights up(3 amigos). I know of this case happening with some because of the ABS system if i am not correct. I put a code reader on it and its throwing P1590. Erased it and it still didnt cut the lights off. The ABS extensions from ROVERTYM were installed so i was seeing this as maybe the problem. My truck still drives fine and brakes are still good. But is it drivable? Also these heim joints on the Bilstein 7100s are so noisy. Any options other than up sizing the bolts which i did. Also should the bracket be tight up to the spacer and heim?
Last edited: