DII 2" TerraFirma Springs (or RTE)

mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
I'm looking for some used 2" TerraFirma medium (med or heavy duty rear) duty springs, or some RTE's if they are medium duty and don't ride too stiff. It's my daily driver so I don't want it to ride like crap. Would like 2-2.5" of lift and I believe both of those tend to be a bit more than 2".
Would be shipped to Wilmington, NC 28411
 
Last edited:
cupgt

cupgt

Well-known member
Apr 5, 2011
573
1
Upstate SC
I have an OME lift and a set of 2" TF MD springs but they are for a D1. You would have to run a rear spacer in the rear to even it out.,
 
Last edited:
mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
cupgt said:
I have an OME lift and a set of 2" TF MD springs but they are for a D1. You would have to run a rear spacer in the rear to even it out.,
Click to expand...

Do you know what the part number those TF springs are? The fronts are the same, and only the rears are different, Correct? Wonder how much of a spacer I would need?
How much did you want for them?
 
mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
I just looked on the TF website. Looks like I need the TF042 MD front (D2 specific) and the TF027V HD Rears. Someone correct me if I'm wrong. May be able to use the TF023V MD rears (but it looks like it may be less than 2" lift on the D2)
 
Last edited:
cupgt

cupgt

Well-known member
Apr 5, 2011
573
1
Upstate SC
They are TF018 and TF023V. Ride height wont be too different on the MD to HD. The HD springs can just handle a lot more load. Here is a pic.

 
mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
cupgt said:
They are TF018 and TF023V. Ride height wont be too different on the MD to HD. The HD springs can just handle a lot more load. Here is a pic.

Click to expand...

Any chance you would sell just the TF023V's? I know you probably want to sell as a set, figured it doesn't hurt to ask.
 
Last edited:
riceybean

riceybean

Well-known member
Jun 29, 2008
861
0
Vancouver, WA
I have the MD terra's and they sit a little ass low, I just put in a D1 rear spring perch to level it. Now it looks correct, fyi.
 
mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
DiscoPhoto said:
I'll sell my front D2 HD springs if you want them. I'm in need of TF015 springs if anyone has a set of 2.
Click to expand...

How do the HD's ride on the road? Are they stiff? Are they the TF052's? How much do you want for them? How much did the lift end up being with them?
 
Last edited:
D

DiscoPhoto

Well-known member
Jul 23, 2012
2,581
76
Vermont
mike97d1 said:
How do the HD's ride on the road? Are they stiff? Are they the TF052's? How much do you want for them? How much did the lift end up being with them?
Click to expand...

They're definitely stiff, I haven't had them on for more than 6 months I'd say. I'd probably want $65 shipped or so.
 
riceybean

riceybean

Well-known member
Jun 29, 2008
861
0
Vancouver, WA
My TF md's got me about 2.5" now that they have settled in.

That's over the worn out ones I took out, didn't check how they are compared to stock.
 
mike97d1

mike97d1

Well-known member
Aug 13, 2004
1,085
1
Wilmington,NC
riceybean said:
My TF md's got me about 2.5" now that they have settled in.

That's over the worn out ones I took out, didn't check how they are compared to stock.
Click to expand...


I would be happy if I got 2.5". I'm a little scared that the front will sit higher than the rear with the HD's since I don't have a winch, but I can make a spacer to fix that.
 
You must log in or register to reply here.
Top Bottom