So this is what i came up with after i started the complete dash removal - After looking at it for a long while and calling a LR Tech to see if what i planned was OK to do...
First off remove the Glove Box, Heater Fan, Heater "Fan Box", Center Console, Dash Support brackets on passenger side - loosen drivers side.
Loosen the main Nuts/Bolts that hold the Heater Core Box to the Firewall - 2 each side (OK its been 6 months since i did this so this step may not be needed)
Have some old rags available for the remaining coolant in core and pipes.
First off remove the Glove Box, Heater Fan, Heater "Fan Box", Center Console, Dash Support brackets on passenger side - loosen drivers side.
Loosen the main Nuts/Bolts that hold the Heater Core Box to the Firewall - 2 each side (OK its been 6 months since i did this so this step may not be needed)
Have some old rags available for the remaining coolant in core and pipes.
Last edited: