For Disco 1 - DBA (Disc Brakes Australia) - full set of rotors:
For Discovery Series 1 (94-99) - 1 set of four (4) DBA (Disc Brakes
Australia) slotted and cross-drilled rotors.
I have a set that is used, but has only 6000 miles on the rotors.
In my quest for better braking, I tried them and they do indeed improve
braking over stock, but since my truck now sees mainly trail duty, the
slotting and crossdrilling is a pain in lots of mud. If you have a
truck that sees mainly road duty or you wheel without much mud - these are for you.
The set is in great shape with probably 95% or better rotor thickness
remaining. There is no discernable wear or pad run-in. The inside surface of
one rear rotor has some light scoring due to sand being trapped between the
pad and rotor (scoring is less than 0.25mm deep). This does not cause any issues and would smooth out quickly during normal road braking.
ABS tone rings are included with the rear rotors if you want them (no ABS
anymore on my truck, so I don't need them).
Anyway - first $125 for the set takes them - current cost is about $100 PER
ROTOR. My loss your gain.
Can ship via UPS - but remember these are heavy!
Bill Bettridge
webviii@comcast.net
PS - before anyone asks - rear rotors fit all RRC and Defender 90's - front
rotors fit only series 1 Discos.
PPS - Measured rotor thicknesses:
Front 1 - 13.60mm
Front2 - 13.61mm
Rear1 - 12.29mm
Rear2 - 12.25mm
For Discovery Series 1 (94-99) - 1 set of four (4) DBA (Disc Brakes
Australia) slotted and cross-drilled rotors.
I have a set that is used, but has only 6000 miles on the rotors.
In my quest for better braking, I tried them and they do indeed improve
braking over stock, but since my truck now sees mainly trail duty, the
slotting and crossdrilling is a pain in lots of mud. If you have a
truck that sees mainly road duty or you wheel without much mud - these are for you.
The set is in great shape with probably 95% or better rotor thickness
remaining. There is no discernable wear or pad run-in. The inside surface of
one rear rotor has some light scoring due to sand being trapped between the
pad and rotor (scoring is less than 0.25mm deep). This does not cause any issues and would smooth out quickly during normal road braking.
ABS tone rings are included with the rear rotors if you want them (no ABS
anymore on my truck, so I don't need them).
Anyway - first $125 for the set takes them - current cost is about $100 PER
ROTOR. My loss your gain.
Can ship via UPS - but remember these are heavy!
Bill Bettridge
webviii@comcast.net
PS - before anyone asks - rear rotors fit all RRC and Defender 90's - front
rotors fit only series 1 Discos.
PPS - Measured rotor thicknesses:
Front 1 - 13.60mm
Front2 - 13.61mm
Rear1 - 12.29mm
Rear2 - 12.25mm
