Hello, could someone please provide me with the mounting instuctions for the disco 2 brush guard. I have searched and saw this topic many times but there don't appear to be any links. Does anyone have a copy they could e-mail me. Thanks
If it is a stock 01 DII I think it mounts with the same bolts that attach the crush cans to the frame. Just remove the crush can bolts on the frame add the brush guard and replace the bolts. IIRC the bolts will be long enough to allow for the stock brushguard. I have not done this but I would think that the stock bumper will hang there while you do the job. If it doesn't just block it up until you get the bolts back in. The drivers side has the factory recovery point and may cause a bolt length problem. If it does you can remove the factory recovery point or get longer bolts. There are two more points back farther on the frame. I don't know if the are rated for recovery but the will work in a pinch.
If you are doing this for looks be aware that an accident with a brush guard will most likely cause more damage. From what I've seen the brush guard folds back into the hood pretty easy.
If you are doing it for function be sure to brace the hell out of it. The way it mounts under the bumper creates a lot of leverage. I think it will twist just like the ARB airbag bumpers. I could be wrong and if I am the Peeps will set me and you straight.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.