Fox Reservoir 10" Shocks New Bushings

Cambo

Cambo

Well-known member
Nov 21, 2005
1,049
0
Lodi, Ca.
I have a pair of Fox 2.0 Reservoirs 10" travel with new urethane bushings, not yet installed. These are used, I bought them used. They are in good shape, shafts are not pitted and they were recently charged. I do not however know the valving. Asking 175 OBO
I will add pics later. Thanks
 
maxyedor

maxyedor

Well-known member
May 9, 2006
1,353
0
Fox 2.0s are the easiest shock on the planet to revalve, undo the set-screw, spin off the body cap, undo the snap-ring, pull shaft out, place in a vice with some soft-jaws, undo the nut on the shaft (should be a 7/8" socket) re-arrange the valves as needed and put it all back together. Remember to let the nitro out and do this with the shock up-side down, do it with the shock charged and your garage will be coated with a fine mist of shock-oil, do it right-side up and your shoes will be coated with a heavy coat of shock oil.
 
michaels

michaels

1
Aug 20, 2007
2,730
45
Nashville TN
maxyedor said:
Fox 2.0s are the easiest shock on the planet to revalve, undo the set-screw, spin off the body cap, undo the snap-ring, pull shaft out, place in a vice with some soft-jaws, undo the nut on the shaft (should be a 7/8" socket) re-arrange the valves as needed and put it all back together. Remember to let the nitro out and do this with the shock up-side down, do it with the shock charged and your garage will be coated with a fine mist of shock-oil, do it right-side up and your shoes will be coated with a heavy coat of shock oil.
Click to expand...

Max, could you give me a run down on how to revalve these to 400/100? i'm up to doing it, i just need to know how to get it to the right valving. all of my searching over the past few hours have left me blank.
 
maxyedor

maxyedor

Well-known member
May 9, 2006
1,353
0
What springs do you run and are they going on the front or the rear?
 
michaels

michaels

1
Aug 20, 2007
2,730
45
Nashville TN
maxyedor said:
What springs do you run and are they going on the front or the rear?
Click to expand...

i sent you a pm, but RTE 2" with a 1" spacer in the rear. my OME shocks have about an inch of extension left in them. going in the rear.
 
stolenheron

stolenheron

Well-known member
May 1, 2008
1,861
0
Hattiesburg, MS
cambo, you can thank me for this business...if i didnt buy michaels sliders he wouldnt have had the cheddar (i had to say it) for your foxes haha

michaels won't flake.
 
stolenheron

stolenheron

Well-known member
May 1, 2008
1,861
0
Hattiesburg, MS
cambo, you can thank me for this business...if i didnt buy michaels sliders he wouldnt have had the cheddar (i had to say it) for your foxes haha

michaels won't flake.
 
michaels

michaels

1
Aug 20, 2007
2,730
45
Nashville TN
LRflip said:
He's a flakey SOB...I bet he flakes like the paint on those sliders he sold you.
Click to expand...

come to think of it, those sliders were a little flaky. probably from riding you mom on them the night before i sold them to chris. how do you think i get the bend to match the doors? your momma ain't a light woman.


i won't flake.
 
Cambo

Cambo

Well-known member
Nov 21, 2005
1,049
0
Lodi, Ca.
All this mama talk is getting me hot!! Shocks are SOLD to one flaky, mama riding SOB!! Michaels
 
You must log in or register to reply here.
Top Bottom